利用SPAMS研究华北乡村站点(曲周)夏季大气单颗粒物老化与混合状态

利用单颗粒气溶胶飞行时间质谱(SPAMS)于2013年6月30日~7月8日对华北地区乡村站点曲周大气单颗粒粒径及其化学组成进行了在线测量,共采集到同时含有正负离子谱图的颗粒230 152个,其粒径主要集中在0.2~2.0μm.结果表明,该地区的大气颗粒物主要分为8类:元素碳(EC,55.5%)、有机碳(OC,10.7%)、钠,钾等碱金属颗粒(alkalis,17.4%)、其他金属颗粒(other metals,1.7%)、富铁颗粒(Fe-rich,6.3%)、富铅颗粒物(Pb-rich,3.1%)、沙尘颗粒(dust,4.8%),other颗粒(0.8%),观测得到的8类气溶胶颗粒中绝大部分包含46NO-2、62NO-3、80SO-3、96SO-4、97HSO-4等二次组分离子,说明这些颗粒都经历了不同的老化过程或与二次组分进行了不同程度的混合.从气溶胶类型的谱分布看,各类型颗粒数浓度峰值基本出现在700~800 nm之间,dust、Fe颗粒主要集中在粗粒径段,EC颗粒子类研究表明随着表面不断吸附NH+4、NO-3、SO2-4等二次组分,EC颗粒逐步演化成老化程度较低的NO-3吸附型EC(ECN)和严重老化的SO2-4吸附型EC(ECS)混合态,两者日变化呈现明显的负相关性,也可能随着二次有机物在EC表面吸附,形成OC/EC混合态.     

Characterising the landscape of state environmental review policies and procedures in the United States: a national assessment

Following the intent of the National Environmental Policy Act of 1969, many states have adopted policies and procedures directing state agencies and local government units to evaluate the potential environmental impacts of development projects prior to their undertaking. In contrast to a rich literature on federal requirements, current understanding of state environmental review is narrowly focused and outdated. This paper seeks to provide information on the landscape of state environmental review policy frameworks. The paper identifies 37 states with formal environmental review requirements through a document review of state statutes, administrative rules and agency-prepared materials, and confirms this finding through a survey of state administrators. A two-tier classification is used to distinguish states based on the approach taken to address environmental review needs and the scope and depth of relevant policies and procedures implemented. This paper also provides a discussion of policy and programme attributes that may contribute to effective practice, and of the potential for adopting relevant legislation in states where environmental review is currently lacking.     

Improving construction site safety through leader-based verbal safety communication

Background

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. Method: A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n = 1,693 interviews), construction site safety level (correct vs. incorrect, n = 22,077 single observations), and safety climate (seven dimensions, n = 105 questionnaires) are measured over a period of up to 42 weeks. Results: Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures. Conclusions: Coaching construction site foremen to include safety in their daily verbal exchanges with workers has a significantly positive and lasting effect on the level of safety, which is a proximal estimate for work-related accidents. It is recommended that future studies include coaching and feedback at all organizational levels and for all involved parties in the construction process. Building client regulations could assign the task of coaching to the client appointed safety coordinators or a manager/supervisor, and studies should measure longitudinal effects of coaching by following foremen and their work gangs from site to site.     

A soil sampling intercomparison exercise for the ALMERA network

Soil sampling and analysis for radionuclides after an accidental or routine release is a key factor for the dose calculation to members of the public, and for the establishment of possible countermeasures. The IAEA organized for selected laboratories of the ALMERA (Analytical Laboratories for the Measurement of Environmental Radioactivity) network a Soil Sampling Intercomparison Exercise (IAEA/SIE/01) with the objective of comparing soil sampling procedures used by different laboratories. The ALMERA network is a world-wide network of analytical laboratories located in IAEA member states capable of providing reliable and timely analysis of environmental samples in the event of an accidental or intentional release of radioactivity. Ten ALMERA laboratories were selected to participate in the sampling exercise. The soil sampling intercomparison exercise took place in November 2005 in an agricultural area qualified as a “reference site”, aimed at assessing the uncertainties associated with soil sampling in agricultural, semi-natural, urban and contaminated environments and suitable for performing sampling intercomparison. In this paper, the laboratories sampling performance were evaluated.     

国产Q345钢在不同热-力路径下的材料性能对比和材料模型应用

为评估和分析钢结构的耐火性能,以我国10个钢厂生产的Q345钢的424次恒载升温试验和152次恒温加载试验结果为依据,对钢材强度和应变以及不同的热-力作用路径下的力学性能进行对比研究。结果表明,在所有热-力作用路径下,恒载升温试验的强度最小,应变最大,临界温度最低;恒温加载试验的强度最大,应变最小,临界温度最高。随温度升高,热-力作用路径对钢材的力学性能影响增大:在450℃以下影响较小,在500℃以上时影响显著。如果规范采用恒温加载试验强度,是不可靠的。恒载升温条件下的ε-T-k材料模型和恒温加载条件下的ε-k-T材料模型均不能单独用于超静定钢结构的性能分析。超静定钢结构的性能分析可把火灾过程离散为若干时段,把每个时段分解为两个独立的应变-温度过程和应变-应力过程,分别应用恒载升温条件下的ε-T-k和恒温加载条件下的ε-k-T材料模型进行分析,然后迭加计算以得出最后的应变。     

Estimation of sampling uncertainty for determination of pesticide residues in plant commodities

In order to provide residue data for refining the estimated sampling uncertainty, a coordinated research program was initiated for performing field studies on residues in individual items of leafy vegetables, small and large crops. The trials were carried out in 13 countries with 3 small fruits, 5 large crops, 2 medium/large crops and 3 leafy vegetables. The 25 pesticide active ingredients applied represented the dicarboximide (3), organophosphorus (8), synthetic pyrethroids (5), phthalimides (2), organochlorine (1) and other types of pesticides (6). In addition, 11 supervised field trials were performed in grapes and lettuce by the pesticide manufacturers, and their results were provided for evaluation. The studies represented actual agriculture practice around the world, and provide reliable data for estimation of sampling uncertainty. Based on the 12346 residue data, the best estimate for the relative sampling uncertainty for composite samples, assuming sample size of 10 for small crops and leafy vegetables and 5 for large crops, with 95% confidence limits in brackets are: small commodities: 0.25 (0.20–0.29); Brassica leafy vegetables: 0.20 (0.16–0.24); large commodities: 0.33 (0.29–0.38).     

M3法测定土壤有效态Cd、Cr、Pb和Ni

通过M3法对耕地土壤重金属的联合测定,为土壤重金属污染监测应用提供快速联合测定的方法。用M3法测定北方耕地土壤的有效Cd、Cr、Pb和Ni,通过对M3法与其他方法进行有效重金属测定值差异性及其相关性比较,与全量的浸出率分析等探讨M3法对耕地土壤有效重金属测定的特征。结果表明,M3法在《土壤环境质量标准》(GB 15618—1995)的土壤重金属含量范围内可以测定土壤有效态重金属Cd、Cr、Pb和Ni,且呈线性极显著相关。M3法与其他方法有效Cd、Cr、Pb和Ni有较好的相关性,与DTPA法呈极显著相关;与NaNO₃法除有效Pb外,呈极显著和显著相关;与HCl法除褐土和潮土的有效Pb外,也呈极显著和显著相关。M3法的有效态Cd、Cr、Pb和Ni的测定值均为最大。M3法对4种耕地土壤有效Cd、Cr、Pb和Ni的浸出率,因土壤类型不同,有效重金属含量所占比率不同,但利用M3法测定的有效态Cd、Cr、Pb和Ni的浸出率最大。     

Characterization of distribution of pesticide residues in crop units

The characteristic features of distribution of pesticide residues in crop units and single sample increments were studied based on more than 19,000 residue concentrations measured in root vegetables, leafy vegetables, small-, medium- and large-size fruits representing 20 different crops and 46 pesticides. Log-normal, gamma and Weibull distributions were found to provide the best fit for the relative frequency distributions of individual residue data sets. The overall best fit was provided by lognormal distribution. The relative standard deviation of residues (CV) in various crops ranged from 15–170%. The 100–120 residue values being in one data set was too small to identify potential effects of various factors such as the chemical and physical properties of pesticides and the nature of crops. Therefore, the average of CV values, obtained from individual data sets, were calculated and considered to be the best estimate for the likely variability of unit crop residues for treated field (CV = 0.8) and market samples (CV = 1.1), respectively. The larger variation of residues in market samples was attributed to the potential mixing of lots and varying proportion of non-detects. The expectable average variability of residues in composited samples can be calculated from the typical values taking into account the sample size.     

Recovery of a marker strain of Salmonella typhimurium in litter and aerosols from isolation rooms containing infected chickens

Abstract

Screening of poultry flocks for foodborne pathogen Salmonella contamination is critical for Salmonella control in preharvest stages of poultry production. In this study, two sampling methods (litter and air filter) were compared for detection of S. typhimurium from experimentally infected chicks some of which had received either a probiotic competitive exclusion culture or transfer of cecal contents from salmonellae‐free adult birds. At 4, 9, and 11 days after inoculation, S. typhimurium samples were enumerated by selective plating. For both types of sampling, the control birds yielded the greatest levels of environmental contamination followed by the samples from the probiotic inoculated birds with the birds receiving the cecal transfer culture having the lowest levels of contamination. Although the two sampling methods responded in a similar fashion, detection sensitivity needs to be increased for air filter sampling.     

Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery1

Claggett, Peter R., Judy A. Okay, and Stephen V. Stehman, 2010. Monitoring Regional Riparian Forest Cover Change Using Stratified Sampling and Multiresolution Imagery. Journal of the American Water Resources Association (JAWRA) 46(2):334-343. DOI: 10.1111/j.1752-1688.2010.00424.x Abstract: The Chesapeake Bay watershed encompasses 165,760 km² of land area with 464,098 km of rivers and streams. As part of the Chesapeake Bay restoration effort, state and federal partners have committed to restoring 26,000 miles (41,843 km) of riparian forest buffers. Monitoring trends in riparian forest buffers over large areas is necessary to evaluate the efficacy of these restoration efforts. A sampling approach for estimating change in riparian forest cover from 1993/1994 to 2005 was developed and implemented in Anne Arundel County, Maryland, to exemplify a method that could be applied throughout the Bay watershed. All stream reaches in the county were stratified using forest cover change derived from Landsat imagery. A stratified random sample of 219 reaches was selected and forest cover change within the riparian buffer of each sampled reach was interpreted from high-resolution aerial photography. The estimated footprint of gross change in riparian forest cover (i.e., the sum of gross gain and gross loss) for the county was 1.83% (SE = 0.22%). Stratified sampling taking advantage of a priori knowledge of locations of change proved to be a practical and efficient protocol for estimating riparian forest buffer change at the county scale and the protocol would readily extend to much broader scale monitoring.